High Pressure Hoses

You can find lots of non-genuine hoses on the market, and they can fit our equipment – but do they have the same specifications as genuine hoses? The answer is: No. From our experience, we have found many cases of unexpected failures caused by using non-genuine hoses. We therefore decided to test genuine and non-genuine hoses to see how they are different.

Genuine vs. Non-Genuine

The following are test results between genuine hoses and non-genuine hoses. For best results, We recommend that you use genuine hoses.

Minimum Burst Pressure

Non-genuine hose breaking pressure is 40% to 50% lower than genuine hoses. Genuine hose breaking phenomenon consisted of just oil leakage, while non-genuine hoses, had not only leakage but in some cases broken fittings, and disconnected fittings.

Tension till Broken

Non-genuine hoses break at 25% to 60% lower tension than genuine hoses.

Impulse Test

Non-genuine hoses start leaking and/or are broken at an 80% to 90% lower cycle than genuine hoses.

Our brand's genuine hoses must meet our strict specifications, but from test results, non-genuine hoses specifications are lower than our brand's genuine hoses. We would like to recommend that you use only our brand's genuine hoses. This will reduce your total maintenance cost (less replacement), and also prevent injury, machine damage and environmental pollution.